Sharp IV-C35M User Manual page 86

(11) Select whether or not to set the evaluation
conditions for measured results.
Select " YES" and press the SET key.
The "DETAIL" item will appear on the lower part
of the screen. Move the cursor to "DETAIL" and
press the SET key.
The "EVALUAT COND" screen will appear.
Select " REGISTER NO." using the up and
down arrow keys. Change the number to "0"
using the up and down arrow keys. Then press
the SET key.
Select " CONDITION SET," "
OF COL," using the up and down arrow keys,
and enter upper and lower limit values. Use the
left and right arrow keys to change between
each digit and use up and down arrow keys to
change values of each digit.
Select a digit using the left and right arrow keys.
Select a number using the up and down arrow
keys. For example, when selecting "
MATCH OF COL," determine values, and then
press the SET key. Then move the cursor to
"NO" on the "OUTPUT" column using the left
and right arrow keys.
After the value is correct, press the SET key.
Then press the left and right keys to move the
cursor to "OUTPUT." Now press the SET key. A
popup menu will appear and you can choose
"NO," "Y," or "C."
Note: "Y" is for terminal block. "C" is for auxiliary
relay.
Move the cursor to "Y" and press the SET key. Then select the Y0 and press the SET key. Now
the evaluation results will be output to the Y0 terminal.
For details about the evaluation conditions, see page 3-28 in Function and Operation.
After the settings are complete, press the ESC key to return to the "SET WIZARD" screen.
Setting Examples Using the Set Wizard
SET WIZARD
[SAMPLE]
COMPARE EVALUATION
CONDITIONS TO MEASUREMENT
RESULTS (YES/NO)
1NO
2YES
EVALUAT COND
1REGISTER NO
2CONDITION SET
3AREA
4HUE (AVG)
5CHROMA (AVG)
6DEG-MATCH OF COL -10000 +10000
7TEST
DEG-MATCH
EVALUAT COND
1REGISTER NO
2CONDITION SET
3AREA
4HUE (AVG)
5CHROMA (AVG)
6DEG-MA
7TEST
DEG-
=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
7-9
EXIT
TYPE00
Start
STEP1 PARALLEL+SERIAL+USB
STEP2 CAPTURE IMG/PARTIAL-IMG
STEP3 MEAS1/CAM1
STEP4 MEAS1/P/COLOR EVALUATION
STEP5 MEAS1/WINDOW/NORMAL
STEP6 MEAS1/MEAS CND
STEP7 MEAS1/EVALUATION
End
SCREEN COND SAVE EDIT SEL COLOR F C1 BRT
0 (0 7) [TEST RESULT]
AUTO (–10%)
000000 245760 A =
000. 0 359. 9 H =
000. 0 255. 0 S=
CM=
EXEC (WITH-POSI. ADJ WITHOUT-POSI. ADJ)
SCREEN COND SAVE EDIT SEL COLOR F C1 BRT
0 (0 7) [TEST RESULT]
AUTO (–10%)
000000 245760 A =
000. 0 359. 9 H =
000. 0 255. 0 S=
Y OUTPUT Use place
Y0 NO
Y1 NO
Y2 NO
Y3 NO
Y4 NO
Y5 NO
Y6 NO
Y7 NO
[OOUTPUT]
NO
NO
NO
NO
7
[OOUTPUT]
NO
NO
NO
SI. AD
NO
Y
C