Fujitsu CT-10 User Manual page 127

RECORDED VOICE ANNOUNCEMENT
(Cont'd)
To record a voice announcement to play for incoming calls at your
extension if you do not have a programmable recorded voice
button:
NOTE
You must cancel the old recorded message before you can record a
new messane.
1. Lift the handset.
- Listen for infernal dial tone.
2. Dial 8 9.
3. Dial
1.
4. Dial the Voice Announcement ID. Consult your Communications
Manager to obtain this two-digit code. No more than one
announcement can be recorded per ID.
- Listen for recording tone indicating that fhe system is ready fo
accept a
message
assignment.
5. Record the announcement.
- Listen for success tone.
- Your announcement now replays if you do not hang up.
- Listen for success tone.
6. Hang up.
To correct an announcement recording error or to rerecord an
announcement after confirmation:
l
Dial * before hanging up.
- Listen for recording tone indicating that the system is
ready
fo
accept an announcement assignment.
NOTE
After completion of the recorded voice announcement procedure, the
protect mode for the Voice Announcement ID must be released and
the designated announcement must be canceled. See your
Communications Manager for details.
117