Fujitsu CT-10 User Manual page 158

FEATURE BUTTON PROGRAMMING (Cont'd)
NOTES
CO line buttons and ICM buttons cannot be replaced with another
feature.
Reorder tone is heard if button programming is not successful.
Only Automatic Intercom, ICM Hold Answer, DSS Park, DSS Speed
Call and DSS Camp-On can be assigned more than once on a CT or
DSS.
When 000 is entered as FNO, no feature is assigned to that button.
The following assignment conditions are applied to Subordinate Data
Call:
l
A Subordinate Data Call button cannot be assigned when the
data terminal is set to Auto Originate mode.
During step 4, pressing another button will allow you to jump back to
step 3 without changing the button assignment.
The system will time out if no action is taken.
Pressing #will allow you to move forward to the next available
feature, * will display the previous feature, 3 allows you to skip forward
five features, and 1 will allow you to skip backward five features.
Pressing 0 when a feature is displayed will assign that feature to the
button.
148