Fujitsu CT-10 User Manual page 26

HEADSET OPERATION
The headset adapter lets your telephone accept any of the standard
headsets commercially available. Use this feature to make the
programmable headset button act like the hookswitch (the button located
in the cradle of the telephone).
To install a headset:
1. Disconnect: The handset cord. Leave the handset in the
cradle of the telephone.
2. Connect: The free end of the handset cord to the modular
jack on the back of the headset adapter.
3. Connect: The headset to the modular jack on the front of
the headset adapter (jack may be two holed or
modular).
4. Connect: The power transformer to the back of the
headset adapter.
5. Plug In: The power transformer to the wall socket.
. To place a call using the headset:
1. Press the headset button.
- The headset /amp lights in fhe steady paftefn.
2. Press the line or ICM (Intercom) button.
- The appropriate dial tone sounds,
- The line or EM /amp flashes in the interrupted pattern.
3. Proceed with normal telephone operations.
16