Silent Message - Fujitsu CT-10 User Manual

SILENT MESSAGE. . . Using Message Pick-Up
To send a Silent Message to another extension by using a feature
code!
1. Lift the handset.
- Listen for dial tone.
2. Dial* 1.
NOTE
If the extension to which you send a message is a CT-1 0, your display
shows DONE signifying that a message waiting lamp is turned on at
that extension.
3. Dial the desired extension number.
4. Dial the Silent Message ID.
- Listen for success tone.
- The called extension receives a silent message tone.
- A message pick-up or message waiting lamp lights steadily
at the calied extension.
To send a Silent Message using the message pick-up button when
the called party is busy or does not answer:
4. Press the message pick-up button.
2. Dial the Silent Message ID.
- Listen for success tone.
- The called extension receives a silent message tone.
- A message pick-up or message waiting lamp lights steadily
at the called extension.
NOTE
A silent message ID is a two-digit number programmed into your system.
See the list of programmed messages and IDS at the end of this sectiqn.
71