Mitsubishi Electric MELSEC Q Series User Manual page 210

2) For High Performance model QCPU
model QCPUíç1
(Extension time) = (No. of transmission/reception word points)
The number of transmission/reception words is the total number of
transfer data below.
Link refresh data
Data transferred to file register of memory card :
Transfer between data links
Use the values in Table5.10 for N5
Table5.10 Time increased by coincident refresh request from a network module of another
High Performance model QCPU/
Process CPU
Univwesal model QCPU
Q02CPU
Q02HCPU, Q06HCPU, Q12HCPU,
Q25HCPU
Q02PHCPU, Q06PHCPU, Q12PHCPU,
Q25PHCPU
Q00UCPU, Q01UCPU, Q02UCPU,
Q03UDCPU, Q04UDHCPU, Q06UDHCPU,
Q10UDHCPU, Q13UDHCPU, Q20UDHCPU,
Q26UDHCPU, Q03UDECPU,
Q04UDEHCPU, Q06UDEHCPU,
Q10UDEHCPU, Q13UDEHCPU,
Q20UDEHCPU, Q26UDEHCPU
íç1
High
Note5.3
performance
The CC-Link IE controller network can only use the High Performance model QCPU whose first 5 digits of serial No. is
09012 or later.
Note5.4 Process
The CC-Link IE controller network cannot use the Process CPU.
Note5.5
Universal
Since the Universal model QCPU does not support transfer between data links, adding the number of points for
transfer between data links is unnecessary.
CHAPTER5 PROCESSING TIME OF QCPU IN MULTIPLE CPU SYSTEM
/Process CPU
Note5.3
N5 (No. of other CPUs) ( s)
(LB + LX + LY + SB)
:
16
(LB + LX + LY + SB)
16
LB
Note5.5
:
+ LW
16
System with main base unit
only
0.54 s
/Universal
Note5.4
+ LW+SW
+ LW+SW
2
N5
System including extension
base unit(s)
1.30 s
1
2
3
4
5
6
7
8
5 - 8