6.1.6 Control CPU settings
Sets up the control CPUs (Control PLCs) for the I/O modules and intelligent function modules mounted on the base
unit in the multiple CPU system.
All default settings are set to CPU No.1.
6.1.7 Multiple CPU synchronized boot-up
This is set for synchronizing the boot-up time for each CPU module.
(
Section 4.5)
6.1.8 Multiple CPU high speed transmission area setting
This is set when the auto refresh is performed using the multiple CPU high speed transmission area in the multiple
CPU system.
(
Section 4.1.3)
The multiple CPU synchronized boot-up and the multiple CPU high speed transmission area setting are available when the
following CPU modules are used.
• Universal model QCPU (except Q00UCPU, Q01UCPU, Q02UCPU )
• Motion CPU (Q172DCPU, Q173DCPU )
6 - 9
Figure 6.3 Control CPU setting screen