System Configuration; System Configuration Using Basic Model Qcpu (Q00Cpu, Q01Cpu) - Mitsubishi Electric MELSEC Q Series User Manual

CHAPTER2 SYSTEM CONFIGURATION
This chapter explains the system configuration of Multiple CPU Systems, and the precautions for Multiple CPU System
configuration.

2.1 System configuration

2.1.1 System configuration using Basic model QCPU (Q00CPU, Q01CPU)

This following explains the system configuration using the Basic model QCPU.
(1) System using the main base unit (Q3 B)
(a) System configuration
Battery for
QCPU (Q6BAT)
*1: As a power supply module, use the Q series power supply module.
Make the power consumption within the rated output current value of the power supply module.
The Slim type power supply module and Redundant power supply module cannot be used as a power supply module.
*2: No Q series power supply module is required for the Q5 B type extension base unit.
*3: The QCPU battery (Q6BAT) cannot be installed to the Motion CPU and the PC CPU module.
*4: For further information on PC CPU module, consult CONTEC Co., Ltd
Tel: +81-6-6472-7130
*5: Be sure to set the control CPU of motion modules to the Motion CPU
*6: The PC CPU module and C Controller module cannot be mounted together.
2 - 1
Basic model
QCPU
Extension cable
Figure 2.1 System configuration when Basic model QCPU is used
C Controller
Motion PC CPU
module *
CPU* 3 module * 3, * 4, * 6
Q3 B type main base unit * 1
Q series power supply/input/output/intelligent
function module/motion module *
Q5 B type extension base unit * 2
1
Q6 B type extension base unit *
6
5