2.2 Configuration of peripheral devices
This section describes the system configurations of peripheral devices that can be used with the Basic model QCPU,
High Performance model QCPU, Process CPU and Universal model QCPU.
For connection between the Motion CPU, PC CPU module or C Controller module and peripheral in the multiple CPU
system, refer to the manual of each CPU module.
(1) When using the Basic model QCPU
*:
The available version varies depending on the system configuration. (
Basic model QCPU
PC (GX Developer, GX Configurator)
*
Figure 2.23 Configuration of peripheral devices
CHAPTER2 SYSTEM CONFIGURATION
RS-232 cable
Section 2.3)
1
2
3
4
5
6
7
8
2 - 38