Wall-Vented Installation; Prepare The Venting; Roof-Vented Installation - GE JVM2052 Installation Instructions Manual

Installation Instructions
F_ PREPARE THE VENTING {cont.}
F_ INSTALLATION TYPES {cont.)
Wall-Vented Installation (cont.):
[_ Reassemble the blower wire.
%
Rotate the unit so that the exhaust ports face
the rear of the cabinet. When gou insert the blower
unit, the blower wire must be as shown.
unit
%
[]
Exhaust ports
Place the blower unit back into the cabinet.
Check that the exhaust ports face toward
the rear of the cabinet.
Reattach the blower plate to the cabinet so the
exhaust ports and blower plate opening are aligned.
Attach with one blower unit mounting screw and
then one blower plate mounting screw.
Blower unit
Blower p late
mounting screw
I__ (option)
........ ............. wer plate" E:!° i
-
__'Blowe[ unit
_'_ _"_ - mounting screw
Blower u nitexhaust ports (option)
11
Roof-Vented Installation:
[] Remove one blower unit mounting screw and one
or two blower plate screw(s). Remove the blower
plate from the cabinet. Blower
p late
mounting screw
(option)
Blowerunit --,
_r i_ctllplat e i
.......... i'i.............
i !
__)"_ _' I BIower u nit
__--------_ r-T_ounting screw
Parts "B" (option)
%
Use side cutter or tin snips to cut and remove
knockouts "A" from the blower plate. Discard
knockouts. Be careful not to distort the plate.
",_ Knockouts "A"
glower_
%
%
%
%
Carefully lift the blower unit out of the microwave
oven.
Rotate the blower unit 90° so the exhaust ports
face the top of the cabinet.
__ Blower u nit
Reassemble the blower wire.
Place the blower unit back into the microwave oven.
Reattach the blower plate to the microwave oven.
Attach with the one blower unit mounting screw and
then the one or two blower plate mounting screw(s).
Blowerunit
Bl_ower plate
mounting
screw (option)
Blower u nit
Blower --. _e1_ mounting
screw (option)
[_ Attach the exhaust adapter to the blower plate
by sliding it into the Guide.
.__ Exhaust adapter
_q:---- Back of oven