Damage-Shipment/Installation; Parts Included - GE JVM2052 Installation Instructions Manual

Installation Instructions
DAMAGE- SHIPMENT/
INSTALLATION
• If the unit is damaged in shipment, return
the unit to the store in which it was bought for
repair or replacement.
• If the unit is damaged by the customer, repair
or replacement is the responsibility of the customer.
• If the unit is damaged bg the installer (if other
than the customer), repair or replacement must
be made by arrangement between customer
and installer.
PARTS INCLUDED
HARDWARE PACKET
L PART _ QUANTITY
LagScrews(Y4" x 2") 4
(for wall stud holes)
_!_ . ToggleBolts(1/4" x 3") 4
(for drywall holes)
SpringToggleHeads 4
(for toggle bolts)
Bolts 2
!bww,_,_,_ (for securing to
the uppercabinet)
_:) Tapping Screws(½"x1A") 1 black
(for attachingthe 2 bronze
damperduct connector)
1
PowerCordClampand
Dark-Colored M ounting
Screw (to hold
the powercord)
You will find the installation hardware contained
in a packet with the unit. Check to make sure you
have all these parts.
NOTE: Some extra parts are included.
NOTE:You need to install at least two lag screws
into a 2" x 4" stud and four anchor bolts into the wall.
Also, the mounting area must meet the 150 Ibs.weight
requirement.
PARTS INCLUDED
ADDITIONAL PARTS
PART
L ....... _.........
INSTALLATION I
INSTRUCTIONs
i pperCabinet
+ Template
RearWall
.,o i Template
i (3 pieces
mounting
plateonly)
installation
instructions
Exhaust
Adapter
Damper 1
PowerCord
Clamp Bushing
(forthe cord
holein a metal
uppercabinet)
6