Moving Several Tracks At A Time (Quick Move) - Kenwood DM-5090 Instruction Manual

Use the following procedure to change the current order of
tracks by selecting a desired order and moving the tracks
34
together.
Preparation
1 Put the MD recorder in stop mode.
2 Press the EDIT/SPACE key to switch the
editing mode on.

Moving several tracks at a time (QUICK MOVE)

1
Select "Q.MOVE".
1 Select "Q.MOVE".
2 Set the selection.
2
Select the track numbers to be moved.
1 Select a track number.
To decrease
track No.
2 Set the selection.
Repeat steps 1 and 2 until all tracks have
been arranged in the desired order.
3
End the selection of the track numbers to be moved.
JOG DIAL
4 ¢
SET
JOG DIAL
4 ¢
To increase
track No.
SET
ENTER
20 continuous tracks within the specified range can be
reordered at a time.
The modes are switched by rotating the JOG DIAL.
1 Q. MOVE? : Moving (reordering) tracks
2 Q.ERASE? : Erasing track(s)
÷ Editing is aborted if no operation has been performed for 8 seconds.
L 40 30
21 18
R
PGM SEARCH
Q . M O V E
L 40 30 21 18
R
PGM SEARCH
/
÷ Press the EDIT/SPACE key again to abort the editing operation.
L 40 30 21 18
R
PGM SEARCH
/ |0 0 4 ?
÷ Only the last selected track can be cleared by pressing the DELETE key
of the remote control unit. (To clear all of the selected tracks, cancel
editing and restart the operation from the beginning.)
÷ The orders of tracks can be confirmed by pressing the 1 key (or ¡
key) of the remote control unit.
L 40 30 21 18
R
PGM SEARCH
0 0 4 / |0 0 5 ?
Selected track No.
Editing
DM-5090 (En)
15 OVER ( dB)
12 9 7 5 3 1 0 ANALOG
1
?
MONITOR
Title scrolling
15 12 9 7 5 3 1 0 OVER ( dB) ANALOG
1
|
0 0 1 ? A B
MONITOR
Selected track No.
15 12 9 7 5 3 1 0 OVER ( dB) ANALOG
1
A B C
MONITOR
Next track No.
15 OVER ( dB)
12 9 7 5 3 1 0 ANALOG
1
A B C
MONITOR
DIGITAL
2 3
32kHz
44.1kHz
48kHz
DIGITAL
2 3
32kHz
44.1kHz
48kHz
DIGITAL
2 3
32kHz
44.1kHz
48kHz
DIGITAL
2 3
32kHz
44.1kHz
48kHz