Moving Several Tracks At A Time (Quick Move) - Kenwood DM-SE7 Instruction Manual

34
Use the following procedure to change the cur-
rent order of tracks by selecting a desired order
and moving the tracks together. (up to 255 tracks)
Preparation ¶ Enter the stop mode.

Moving several tracks at a time (QUICK MOVE)

1
Select the "Q.MOVE".
1 Press the EDIT key .
EDIT
2 Select the "Q.MOVE".
4
3 Set it. SET
2
Select the track you want to move.
1 Select a track number.
4
To decrease
track No.
2 Set it.
SET
3 Repeat steps 1 and 2 above.
4 End the selection of the group to be moved.
ENTER
7
¢
¢
To increase
track No.
: Keys and control used in the op-
erations described on this page.
Each press of the 4 ¢ keys switches the operation.
1 Q.MOVE
2 Q.ERASE
¶ Editing is aborted if no operation has been performed for
8 seconds.
Q . M O V E
= >
0 0 1 /
Track No. to be moved
= >
/
0 0 3
Selected track No.
CURSOR/CHECK
¶ Pressing the 1 ¡ key allows to check the current
order of tracks.
¶ Pressing the CLEAR/DELETE key allows to cancel the
last selected track only. (To erase previously selected
tracks, press the EDIT key and restart from the begin-
ning.)
Editing
DM-SE7(En)
MANUAL
? L
30 10 5 3 1
R
MANUAL
0 0 1 ?
L
30 10 5 3 1
R
MANUAL
0 0 4 ? ?
L
30 10 5 3 1
R
0 ( dB)
( dB)
0
0 ( dB)