Kenwood DM-SE7 Instruction Manual page 50

50
Displayed messages and actions to be taken against them
Displayed Message
UNLOCK
SCMS ON
DISC FULL
TITLE FULL
BLANK DISC
NO TRACKS
READING
WRITING
DISC ERROR
CAN'T EDIT
? (blinking)
PROTECTED
PLAY ONLY
CAN'T LOAD
CAN'T COPY
Meaning
¶ An attempt is made to record digital
signal from a source using other sam-
pling frequency than 38kHz, 44.1 kHz,
48 kHz.
¶ The optical fiber cable is unplugged
or loose. (The connector is not con-
nected.)
¶ An attempt is made to record digital
signal from a source while its digital
copy has been prohibited by SCMS.
¶ There is no recordable area on the
disc.
¶ An attempt is made to record a 256th
track.
¶ An attempt is made to assign a title
with more characters than usable.
¶ The disc does not contain any record-
ings.
¶ The disc does not contain any tracks
but has a disc title.
¶ The TOC*
1
data of the disc is being
read.
¶ The data related to editing or record-
ing is being written in the disc.
¶ The contents of UTOC
mal.
¶ An attempt is made to perform editing
beyond the restrictions, for example to
erase a track which is too short.
¶ This is a message for confirming if
editing can really be executed.
¶ The Mini Disc is in the "WRITE PRO-
TECT" condition.
¶ A playback-only Mini Disc is loaded.
¶ A CD corresponding to CD-TEXT has
not been inserted into the CD player.
¶ The CD player is not connected via an
optical fiber cable.
¶ Title copying may not be possible,
depending on the disc.
¶ Use analog recording.
¶ Connect the optical fiber cable cor-
rectly.
¶ Use analog recording.
¶ Use another recordable disc.
¶ More than 255 tracks cannot be
recorded per disc.
¶ Refer to "Total number of title char-
acters".
¶ When playback is required, use a
recorded disc.
¶ The disc can be used for recording
without any problem.
¶ This is a normal operation.
¶ This is a normal operation.
¶ Perform "QUICK ERASE" to delete
*2
are abnor-
all titles "+
possible, use another disc.
¶ Perform editing following the re-
strictions.
¶ Press the ENTER key to execute
editing.
¶ Release the "WRITE PROTECT"
condition.
¶ Load a recordable Mini Disc.
¶ Set a CD corresponding to CD-TEXT
into the CD player.
¶ Connect the CD player with an op-
tical fiber cable and match the REC
INPUT of the MD recorder.
¶ The titles of this disc can not be
copied. (Replace the disc.)
In case of difficulty
DM-SE7(En)
Action
¢
@#
¢
r
+ + ALL?". If this is not + +
‚
9
0