Recording (Analog Input); Analog Recording - Kenwood DM-SE7 Instruction Manual

24

Recording (analog input)

The input jacks connected with audio cords ac-
cept analog signals. This unit records the analog
signal from the REC IN jacks by converting it into
digital signal. (This recording is simply referred to
as analog recording.)
Preparation
¶ Open the write protect tab of the
Mini Disc to make it recordable.
¶ Load the Mini Disc.
¶ Check the remaining recording time.

Analog recording

1
Set the amplifier's input selector to the source to be recorded.
2
Select "ANALOG" or "MONO".
REC
INPUT
3
Select "AUTO" or "MANUAL".
AUTO/
MANU.
4
Adjust the recording level.
1 Play the source to be recorded.
2 Press the ¶ key.
3 Adjust the recording level.
1
To decrease level
9
º
rec
¡
level
To increase level
Main unit
: Keys and control used in the operations de-
scribed on this page.
Each press switches the mode.
1 ANALOG : Analog "stereo" mode.
2 DIGITAL 1 :
3 DIGITAL 2 :
4 MONO
: Analog "mono long-time" mode.
Goes off when "MONO" is selected.
0 0 1
¶ When "MONO" is selected, the sound of the input
source is recorded with mixing of left and right channel.
Recording is possible for about twice the time of a
stereo recording.
Each press switches the mode.
1 goes off (AUTO) : Track numbers are added au-
2 MANUAL
: Track numbers are added
Extinguished in "AUTO" mode, lit in "MANUAL" mode.
0 0 1
¶ When the ¶ key is pressed, the recording automatically
is paused.
A T T : - 1 2 d B
¶ Adjust so that the 0 dB segments of the level meter light
occasionally.
¶ Decrease the level if the red segments of the peak level
meter light.
¶ The recording level can be adjusted with the 1 and ¡
keys of the remote control unit.
DM-SE7(En)
goes off
DIGITAL 1 2
L
30 10 5 3 1
R
∞
tomatically.
∞
manually.
MANUAL
L
30 10 5 3 1
R
MANUAL
L
30 10 5 3 1
R
Level value 0dB
( dB)
0
( dB)
0
0 ( dB)