Kenwood DM-SE7 Instruction Manual page 27

4
Play the CD player.
5
After recording, eject the Mini Disc.
To pause recording
¶ Press the key again to resume recording. At this time,
the track number is incremented by "1".
¶ Recording can also be started by pressing the ¶ key.
In regard to the MONITOR key
The sound of commercial digital equipment (BS tuner, DAT, etc.) connected to DIGITAL 2 can be monitored. However,
when this unit is used as a general single component, the input source (sound) selected by REC INPUT can be heard.
Operate in stopped condition
MONITOR
During CD recording, the track number is sometimes incremented by 1 when the CD starts to be
played. This is caused by a signal contained in the digital signal components recorded on the CD.
Unnecessary track numbers can be deleted by referring to "Erasing several tracks at a time (QUICK
ERASE)" or "Erasing a single track during playback (TRACK ERASE)".
(Main unit only)
0
8
: Keys and control used in the operations de-
scribed on this page.
¶ To record music with a margin from the beginning, it is
recommended to start the CD playback after the time
display of the MD recorded has started the count.
WRITING EJECT
Information is Mini Disc has been
being written. ejected.
While "WRITING" is displayed, do not ap-
ply shock or vibration to the unit because
Note Note
information is being written on the Mini
Disc.
To stop recording
7
0 0 1
¶ When the sampling frequency of the digital input signal
is not 48 kHz, 44.1 kHz, or 32 kHz, "UNLOCK" will be
displayed and no sound will be heard.
Recording (digital input)
DM-SE7(En)
N O D I S C
"MONITOR" Lights
MONITOR
L
30 10 5 3 1 0 ( dB)
R
‚w
27