Changing Or Deleting A Title - Kenwood DM-SE7 Instruction Manual

46

Changing or deleting a title

1
Perform step 1 of "Activate the title input mode.".
2
Change or delete characters one by one.
1 Move the character to the desired character
(to be changed).
CURSOR/CHECK
1
To return
2 Select a character group.
P.MODE
CHARACTER
3 Select overwrite or insert mode.
TITLE
SEARCH
4 Select a character.
To return
WXY
9
¶ The character keys can be used for direct selection of
characters. When the same key is pressed repeat-
edly, the characters will change.
(Example : When 9 is pressed, the characters will
change in the order of W = X = Y.)
5 Set the selected character.
SET
It is possible to change all of the characters of a title by repeating steps 1 to 5.
Press the CLEAR/DELETE key to erase the title (delete the characters).
¡
To advance
To advance
4 ¢
or
: Keys and control used in the operations de-
scribed on this page.
Selected character blinks.
TOTAL
K E N E O
¶ If the title to be changed is too long to be displayed on
the display section, press the 1 or ¡ key to scroll the
display so that the characters hidden until then appear.
Each press of the P.MODE/CHARACTER key switches
under following the group.
1 A~Z, space (1 blank character)
2 a~z, space
3 0~9, symbols, preset titles (9 types), and so on.
Each press of the TITLE SEARCH key switches the operation.
1 Overwrite mode : To replace characters
2 Insert mode
: To insert characters before the
cursor
¶ The display can be scrolled so that any character (in a
single group) can be selected.
TOTAL
K E N W O
The correct character is selected.
TOTAL
K E N W
O
The cursor moves.
Editing
DM-SE7(En)
r
TITLE
MANUAL
= >
W
V X Z
L
30 10 5 3 1
R
u
TITLE
MANUAL
= >
V W X Z
L
30 10 5 3 1
R
TITLE
MANUAL
= >
W
V X Y L
30 10 5 3 1
R
( dB)
0
0 ( dB)
0 ( dB)