System Operation Features - Kenwood DM-SE7 Instruction Manual

Note on connection of optical-fiber cable
The optical-fiber cable is designed for use in the
connection of the CD player (DP-SE7 or DP-SE9).
The digital signal transmission makes it possible
to record the high-quality sound of CDs without
degradation.
Connection of system control cord
Plugging the connector.
Insert the connector straight until it clicks.

System operation features

Easy operation function
When this unit is connected with the amplifier-tuner (R-
SE7) via a system control cord, the basic operations of
this unit can be controlled from the remote control unit
provided with the R-SE7. This connection also makes
possible the easy operation function which activates
operations according to the input selection made on the
R-SE7 (two-way operations). For details, refer to the
Instruction Manual of the R-SE7.
¶ Insert the optical-fiber cable straight into the connector
until it clicks.
¶ Be sure to attach the protection cap when the connector
is not used.
¶ Never bend or bundle the optical-fiber cable.
Unplugging the connector
While pushing the two sides of the connector, pull it
straight out.
Timer recording/playback
When this unit is connected with the amplifier-tuner (R-
SE7) via a system control cord, timer playback of a disc
and timer recording of radio broadcasting are possible.
For details, read this instruction manual as well as the
Instruction Manual of the R-SE7.
Operations on this unit: Steps 1 to 4 in "Analog
recording."
13
System connections
DM-SE7(En)
¢