Kenwood DM-SE7 Instruction Manual page 25

Dm-se7 instruction manual
Hide thumbs Also See for DM-SE7:
Table of Contents

Advertisement

5
Start recording.
Pressing the pause (8) key also allows to cancel
record-pause mode and start recording.
6
After recording, eject the Mini Disc.
0
AUTO/MANU. key
This key is used to select whether track numbers are
to be marked automatically during recording or they
are to be marked manually during or after recording.
The track numbers can be used to locate the begin-
ning of a track during playback or programming tracks.
Select before starting recording.
AUTO/
MANU.
Extinguished in "AUTO" mode, lit in "MANUAL" mode.
Recording is not possible if the following characters are
displayed.
"
DISC FULL
"
PROTECTED
"
PLAY ONLY
(Main unit only)
Information is
being written.
¶ The eject key is not accepted during recording.
Note
Note
AUTO
If a no-sound input has lasted for 2 seconds during record-
ing, the track number will be incremented automatically by
"1". Usually, use this position for recording. Use this mode
when recording all of the tracks in a CD. When recording
music containing a continuous section with a very low
level, for example when recording classic music, the track
number may be incremented by "1" after such a section.
In this case, cancel the track number later. It is recom-
mended to use the MANUAL mode when recording such
a kind of music.
At the time of digital recording, the track number automati-
cally is incremented by one on the basis of the information
of the digital signal. There is no detection of unrecorded
parts. A track without sound can be produced by stopping
the CD on the playback side.
MANUAL
MANUAL
L
( dB)
30 10 5
3
1
0
The signal is recorded without automatic incrementation of
R
track numbers. A track number can be assigned during
recording (press the EDIT key) or after recording (operate
the TRACK DIVIDE function
This position is convenient when recording live sound or
classic music containing long pianissimo sections onto
disc.
"
: Disc is full
\Erase undesired tracks.
" : The accidental erasure protect tab is open.
\ Close it.
" : A playback-only Mini Disc is loaded.
\ Load a recordable Mini Disc.
WRITING
EJECT
Mini Disc has been ejected.
While "WRITING" is displayed, do not im-
pact or move the unit because information
about recording and editing is being writ-
ten to the Mini Disc.
Recording (analog input)
DM-SE7(En)
9
0
N O
D I S C
).
25

Advertisement

Table of Contents
loading

Table of Contents