Combining Tracks (Combine Function) - Kenwood DMC-G7R Instruction Manual

two consecutive tracks can be combined into one.
Combining Tracks (COMBINE Function) _
EDIT/AUTO MARK
/TIME MARK
® Playback to the end of the second of two
consecutive tracks and then press
the [>[0 key.
When combining track
numbers 5 and 6
© Press the EDIT/AUTO MARK/TIME MARK key
repeatedly until "COMBINE" is displayed.
A confirmatory message regarding
whether or not the tracks should be
combined is displayed.
© To cancel the operation, press the I (OFF)
key.
Press the ENTER/SYNCHRO REC key again.
Hl When Combining Non-Consecutive Tracks
After moving the tracks with the Move function
so that they are consecutive, combine them
with the Combine function. + 54 |
®The tracks are combined and Pause status is
engaged at the start of the combined track.
@ Each subsequent track number is increased by one.
® If the tracks to be combined have track names, the
name of the first of the two tracks is assigned to
the combined track. If that track does not have a
track name, the name of the second of the two
tracks is assigned to the combined track.
© If the first of the two tracks has a recording date and
time, they are assigned to the combined track.
® If the first of the two tracks does not have a recording
date and time, a recording date and time will not be
assigned to the combined track.
The TOC will be recorded.
The followin tracks cannot be combined:
Notes
some tracks that are shorter than 12 seconds in length.
HSI