Kenwood DMC-G7R Instruction Manual page 40

ENGLISH
DMC-G7R(K-En
Recording Functions
@ Checking disc's remaining time — [40]
® Recording in Monaural Extended mode — (40)
@ Re-recording a disc (re-record a previously recorded portion of a disc) — [41
Edit Functions
—Refer to "Edit Functions" in this manual. — (42)
Checking Disc's Remaining Time
You can check how much recording time is remaining on a disc while cording:
is in progress. (Display Changeover function)
Press the DISPLAY key during Record @ The time remaining on the disc is displayed.
Standby status or while recording is in
progress.
Time remaining for recording
@ Pressing the DISPLAY key again will
restore the original status.
pispLaY
Due to MiniDisc standards, the "fmm Due to MiniDisc standards, the display-
ed remaining time of a disc may vary
Note
seers the actual remaining time.
Recording in Monaural Extended Mode
In Monaural Extended mode the recording time is about twice as ona as that ofa a
stereo recording..
Press the key during Record Standby
status. (Changeover cannot be made
@ Status alternates between Monaural!
Extended mode and Stereo mode each time
the key is pressed.
@ When recording in Monaural Extended
mode has been completed, Stereo mode
will be restored automatically.
@ A disc that has been recorded in Monaural
Extended mode can be played back at
double speed. +
@ In the case of stereo input, the left and right audio will be mixed and recorded. At this
time, however, you can listen to the audio in stereo through headphones while you are_
recording.
Notes) « Some discs that have been recorded in Monaural Extended mode cannot be played