Kenwood DMC-G7R Instruction Manual page 57

DMC-G7R(K-En)
Erasing All Tracks (ALL ERASE Function)
Select ALL ERASE . @ in Stop status, press the EDIT/AUTO MARK/
TIME MARK key repeatedly until "ALL
ERASE" is displayed.
EDIT/AUTO MARK
'TIME MARK
® This can also be selected in Stop status, by
depressing the EDIT/AUTO MARK/TIME
MARK key for at least 2 seconds.
Press the ENTER/SYNCHRO REC key.
A confirmatory message regarding
whether or not the track should be erased
is displayed.
® To cancel the operation, press the Il (OFF) key.
Press the ENTER/SYNCHRO REC key again.
@ All tracks are erased.
Once erased, the tracks cannot
be restored; make sure you
Notey want to erase all the tracks,
therefore, before erasing them.
When Editing Has Been Completed
Press the MI(OFF) key. The TOC will automatically be recorded and the power will
turn off.
H HT] :
When "TOC EDIT" Is Displayed
® Do not disconnect the power cord or impact the unit while "TOC EDIT" is displayed during
editing, for the edited contents may not be correctly written to the disc.
HSI