Kenwood DMC-G7R Instruction Manual page 33

~ DMC-G7A(K-En)
Engage Synchro Record Standby status.
Press the ENTER/SYNCHRO REC key.
=~ =dBOO 40
VS mm
PES
Flashing
6 Turn the power off.
(TOC is recorded.)
this may result in a faulty recording.
@ When playback is started on the connected
audio equipment, recording will start
automatically.
ESN #0800 40
Mme
RES
@ When playback on the connected audio
equipment is stopped, Synchro Record
Standby status will be restored
automatically.
When playback is restarted,
recording will continue. A track number will
automatically be assigned at this time.
@ |f there is a continuous blank for at least 3
seconds, Pause status will be engaged.
© Press the I (OFF) key while recording is in
progress.
® Press the I (OFF) key key while Stop status
is engaged.
Track number, recording location, and
other data are referred to as TOC data.
(-~ (37) ) When recording has been
completed and the power has been
turned off, the TOC data will auto-
matically be recorded before the power
is turned off.
otes Recording is not possible at the following times:
® when you are trying to record on a Playback Only MiniDisc (commercially available
music software, etc.);
Lake) LOIN |