Kenwood DMC-G7R Instruction Manual page 21

Skipping to another track during playback (SKIP) —
During Playback of one track you can skip to another track you want to hear.
Press the << key or >> key
® When the >I key is pressed, playback will
skip to the start of the subsequent track.
® Each time the key is pressed, playback will
skip to the next track.
@ When the key is pressed, playback will
skip to the start of the track being played
back.
® Each time the key is pressed, playback will
skip to the previous track.
Fast : Forward and fast-reverse operations can be performed while listening to music.
Hold the «<< key or »»1 key pressed during playback
(ay
Remote control
When You Want a Faster SEARCH Speed
When you initiate Fast Forward/Reverse
operation in Pause status, the SEARCH speed
will be faster than when the operation is initiated
in Play status.
® No sound will be emitted, so the time display
should be used as a measure to locate the
track you want to hear.
@ When the key is released, the Pause status
will be engaged at that point.
For Forward search _: keep pressing the >>!
key during playback.
: keep pressing the
key during playback.
For Reverse search
@ When you lift your finger off the key, normal
playback will be resumed.
@\n fast forward mode, the stop status is
engaged when the end of the last track is
reached.
@|n reverse mode, playback starts when the
start of the first track is reached.
® Depending on recording conditions, sound
interruptions may occur during a fast
forward/reverse operation.
@When Repeat All playback is engaged
(> [22] ), the Fast Forward/Reverse
operation will span the first and last tracks.
{Daiicea nr Dlaw ctatiie will nat ha annanaon \
HSI