Call Options - Panasonic KX-TCD210G Operating Instructions Manual

TCD210G(e-g).book Page 24 Friday, January 14, 2005 1:42 PM
Base Unit Settings

Call options

Changing the recall time
Change the recall time, if necessary, depending
on the requirements of your service provider or
PBX.
1
Press {j/OK}.
2
Select "Basis-Einstell.", then press
{>}.
3
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (Seite 26).
4
Select "Rufoptionen", then press {>}.
5
Select "Rückfrage", then press {>}.
6
Select the desired setting, then press {>}.
7
Press {ih}.
Setting pause length
Change the pause length, if necessary,
depending on the requirements of your service
provider or PBX.
1
Press {j/OK}.
2
Select "Basis-Einstell.", then press
{>}.
3
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (Seite 26).
4
Select "Rufoptionen", then press {>}.
5
Select "Pausendauer", then press {>}.
6
Select the desired setting, then press {>}.
7
Press {ih}.
Storing/changing emergency
numbers
These settings determine which phone numbers
can be dialled while the call bar feature is on
(Seite 20).
1
Press {j/OK}.
2
Select "Basis-Einstell.", then press
{>}.
3
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (Seite 26).
4
Select "Rufoptionen", then press {>}.
5
Select "Notrufnummer", then press {>}.
6
Select a memory location, then press {>}.
24
L If the memory location already contains an
emergency number, the number is
displayed.
7
Enter/edit the number, then press {j/OK}.
L To erase an emergency number, press and
hold {C/T}.
8
Press {ih}.
ARS (Automatic Route Selection)
Different telephone carriers charge different rates
for call to different areas. If you use different
telephone carriers in an effort to save costs,
automatic route selection can automatically dial
the appropriate carrier code when you make calls
to certain area codes according to the way you
program this feature.
Wichtig:
L To use automatic route selection, you must:
– store the carrier codes you use
– store the area codes you want to call using a
specific carrier code
– assign a carrier code to each stored area
code
Contact your telephone carrier(s) for calling
rates.
Beispiel: You have assigned carrier code "9876"
to area code "123".
If you dial "123-4567", the unit dials "9876-123-
4567".
Storing carrier codes for ARS (Turning ARS
on)
Store the carrier codes of the telephone carriers
you use. You can store up to 5 carrier codes.
1
Press {j/OK}.
2
Select "Basis-Einstell.", then press
{>}.
3
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (Seite 26).
4
Select "Rufoptionen", then press {>}.
5
Select "Tarifmanager", then press {>}.
6
Select "Netzbetreiber", then press {>}.
7
Select "Ein", then press {>}.
8
Select a carrier code location (C1 to C5),
then press {>}.