Receiving A Message - Panasonic KX-TCD210G Operating Instructions Manual

TCD210G(e-g).book Page 31 Friday, January 14, 2005 1:42 PM
6
To send the message, press {j/OK}, select
"Senden", then press {>}.
7
Press and hold {C/T} to erase all numbers,
then continue from step 6, "Writing and
sending a new message", Seite 30.
Editing and sending a saved
message
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
To access the public mailbox
Select "Allgemein", then press {>}.
To access a private mailbox
Select the desired mailbox, press {>}, then
enter its password.
4
Select "Absendeliste", then press {>}.
5
Press {e} or {v} repeatedly to select the
message, then press {j/OK}.
6
Press {j/OK}, select
"Nachr.Editieren", press {>}, then
continue from step 5, "Writing and sending a
new message", Seite 30.
Erasing saved messages
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
To access the public mailbox
Select "Allgemein", then press {>}.
To access a private mailbox
Select the desired mailbox, press {>}, then
enter its password.
4
Select "Absendeliste", then press {>}.
5
Press {e} or {v} repeatedly to select the
message, then press {j/OK}.
6
Press {j/OK}, select "Löschen", then
press {>}.
L To erase all messages in the selected
mailbox, select "Alle löschen", then
press {>}.
7
Select "Ja", then press {>}.
8
Press {ih}.
SMS (Short Message Service)

Receiving a message

When an SMS message is received:
– a tone is heard (if the ringer is turned off, this
tone is not heard)
– "Empfange SMS-Nachricht" is displayed
– F is displayed
Reading a received message
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
To access the public mailbox
Select "Allgemein", then press {>}.
To access a private mailbox
Select the desired mailbox, press {>}, then
enter its password.
L If a mailbox contains new (unread) SMS
messages, "@" is displayed next to the total
number of messages for that mailbox.
4
Select "Empfangsliste", then press {>}.
5
Press {e} or {v} repeatedly to select a
message.
L Messages which have already been read
are indicated by a "Q", even if they were
read using another handset.
6
Press {j/OK} to read the message content.
Hinweis:
L To call the message sender, press {C} or
{s}.
L If "SMS-Speich voll" is displayed, new
SMS messages cannot be received. Erase
unnecessary messages (Seite 31, 32).
L If you receive a message from a party saved in
the phonebook, the stored name is displayed.
L Some SMS service providers attach a 1-digit
number to the message sender's phone
number, and sender names stored in the
phonebook may not be displayed as a result.
Replying to a message
1
While reading a received message, press
{j/OK}.
2
Select "Antworten", then press {>}.
3
Enter a message (Seite 34), then press
{j/OK}.
31