Sending A Message - Panasonic KX-TCD210G Operating Instructions Manual

TCD210G(e-g).book Page 30 Friday, January 14, 2005 1:42 PM
SMS (Short Message Service)
2, store the Message Centre 1 phone number
as is, without adding a line access number or
dialling pause.

Sending a message

Writing and sending a new message
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
To access the public mailbox
Select "Allgemein", then press {>}.
To access a private mailbox
Select the desired mailbox, press {>}, then
enter its password.
4
Select "Eingeben", then press {>}.
L If "^Letzt.TextVerw?" is displayed,
you can use the text from the last message
you created by pressing {e}. This
message will be displayed only if the last
message was created using the same
mailbox you selected in step 3.
5
Enter the message (Seite 34), then press
{j/OK}.
6
Enter the destination phone number (20
digits max.), then press {j/OK}.
L To send the message to a party saved in
the phonebook, press {k}, select the
phonebook entry, then press {j/OK} 2
times.
L To send the message to a party logged in
the caller list, press {e} or {v} repeatedly
to select the party, then press {j/OK} 2
times.
L To send the message to a phone number
logged in the redial list, press {R}
repeatedly to select the phone number,
then press {j/OK} 2 times.
L If you wish to send the message to the
other party's mailbox, enter the other
party's mailbox number after the
destination phone number.
Beispiel: The other party's phone number
is 123456 and their mailbox number is 1.
Enter 1234561.
30
If you do not enter the other party's mailbox
number, the message will be sent to the
public mailbox.
7
To save the message, select "Ja", then
press {>}.
L To send the message without saving it,
select "Nein", then press {>}.
8
To send the message, select "Senden", then
press {>}.
L To cancel sending, press {ih}.
Hinweis:
L This unit supports SMS messages of up to 612
characters, however, the maximum number of
characters you can send or receive may be
limited by your SMS service provider. Consult
your SMS service provider for details.
L If your message contains over 160 characters,
"@LangNachricht@" is displayed. Your
service provider may treat long messages
differently from other messages. Consult your
service provider for details.
L "Ungültige Nr." is displayed if you try to
send a message to a phone number saved in
the phonebook, caller list, or redial list that is
over 20 digits long.
L When sending a message, "Sende
Nachricht" is displayed momentarily, then
"Nachricht wird übermittelt" is
displayed.
L If your phone is connected to a PBX, store the
PBX line access number (Seite 33).
Sending a saved message
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
To access the public mailbox
Select "Allgemein", then press {>}.
To access a private mailbox
Select the desired mailbox, press {>}, then
enter its password.
4
Select "Absendeliste", then press {>}.
5
To read a saved message, press {e} or {v}
repeatedly to select the message, then press
{j/OK}.
L Messages are displayed in chronological
order and by destination phone number.