Intercom Between Handsets; Transferring Calls Between Handsets, Conference; Calls - Panasonic KX-TCD210G Operating Instructions Manual

TCD210G(e-g).book Page 38 Friday, January 14, 2005 1:42 PM
Multi-unit Operation
L If you changed the PIN, enter it (Seite 26).
4
Select "Andere Optionen", then press
{>}.
5
Select "Wiederholmodus", then press
{>}.
6
Select "Ein" or "Aus", then press {>}.
7
Press {ih}.
Hinweis:
L After turning repeater mode on/off, you will not
be able to make or receive calls for a few
moments.

Intercom between handsets

Intercom calls can be made between handsets in
the same radio cell, but not between handsets in
different radio cells.
Beispiel: When handset 1 calls handset 2
1
Handset 1:
Press {INT} and {2} (desired handset
number).
2
Handset 2:
Press {C} or {s} to answer.
3
When finished talking, press {ih}.
Transferring calls between
handsets, conference calls
Outside calls can be transferred between 2
handsets in the same radio cell. 2 handsets in the
same radio cell can have a conference call with
an outside party.
Beispiel: When handset 1 transfers a call to
handset 2
1
Handset 1:
During an outside call, press {INT} and {2}
(desired handset number).
L The outside call will be put on hold.
L If there is no answer, press {INT} to return
to the outside call.
2
Handset 2:
Press {C} or {s} to answer the page.
L Handset 2 can talk with handset 1.
3
Handset 1:
38
To complete the call transfer, press {ih}.
To establish a conference call, press {3}.
Transferring a call without speaking to the
other handset user
1
During an outside call, press {INT}, then
press the desired handset number.
L The other handset rings if it is within range
of the base unit and turned on.
2
Press {ih}.
L The outside call rings at the other handset.
Hinweis:
L k flashes to indicate the outside call is on
hold.
L If the other handset user does not answer the
call within 1 minute, the call will ring at your
handset again.