Table of Contents
Advertisement
2. Slide the other tab (1) into the right hole (2) of the
extender from below until it clicks into place.
If the extender is detached
1. Line up the extender (1) underneath the output tray
(2), and insert the left side of the extender into the
output tray.
2. Attach the extender (1) by bending the side of the
output tray downward slightly and pressing the right
side of the extender.
2
1
1
2
1
1. Introduction and Installation
1.8 Recording paper
The paper input tray unit can hold:
– Up to 250 sheets of 60 g/m
– Up to 230 sheets of 80 g/m
– Up to 200 sheets of 90 g/m
L Please refer to page 91 for information on recording
paper.
L The unit is set for printing A4 size paper by
default. If you want to use letter or legal size
paper, change the setting (feature #380 on page
54).
1
Pull the paper input tray (1) completely out.
1
2
Pinch the front side of the recording paper guide
(1), then slide it to match the paper size mark.
Pinch both sides of the recording paper guides (2),
then slide them to match the paper size mark.
LGL
LTR
A4
2
1
2
2
to 75 g/m
paper.
2
paper.
2
paper.
LGL
A4
LTR
2
13
Advertisement
Table of Contents
