Epson AcuLaser CX37DNF User Manual page 15

QUALITY PRIORITY
DENSITY LEVEL
DEFAULT TX
Epson AcuLaser CX37DNF
Settings
STD/TEXT / FINE/TEXT / S-FINE/TEXT / STD/PHOTO /
FINE/PHOTO / S-FINE/PHOTO
Select the default scanning resolution (fax document quality).
❏
STD/TEXT: Select this setting for documents containing handwriting
or for computer printouts.
❏
FINE/TEXT: Select this setting for documents containing small print.
❏
S-FINE/TEXT: Select this setting for documents containing small
print, such as newspapers, and documents containing detailed
illustrations.
❏
STD/PHOTO: Select this setting for photo documents containing
regular photos.
❏
FINE/PHOTO: Select this setting for photo documents containing fine
images.
❏
S-FINE/PHOTO: Select this setting for photo documents containing
finer images.
To change the resolution during transmission from the default setting
specified here, refer to "Selecting the Resolution" on page 26.
Settings (Light)
Specify the density for scanning a document.
To change the density during transmission from the default setting speci-
fied here, refer to "Selecting the Scan Density" on page 27.
Settings MEMORY TX / DIRECT TX
Select the desired method for sending documents.
❏
MEMORY TX: With this method, the fax transmission starts after the
entire document is scanned and stored in the memory. The total
number of pages is automatically printed with the page number in the
header. However, the memory may become full if there are many
pages in the document or if the data is large due to the fine image
quality (resolution).
❏
DIRECT TX: With this method, the transmission is performed in real
time in the transmission sequence of the destinations. If there are
many pages in the document, the fax can be sent with this method
without the memory becoming full.
To change the method for sending documents during transmission from
the default setting specified here, refer to "Memory Transmission and Di-
rect Transmission" on page 37.
Control Panel and Configuration Menu
Facsimile User's Guide
(Dark)
15