Sending A Fax At A Specified Time (Timer Transmission) - Epson AcuLaser CX37DNF User Manual

5. Press the Start key.
The document is scanned, and then the fax is sent.
Note:
❏ To stop the transmission, press the Stop/Reset key. A message appears, requesting confirmation
to cancel the setting. Select YES, and then press the Select key. If this is done, all selected
recipients are cleared.
❏ If FAX TX in ADMIN. MANAGEMENT/PASSWORD SETTING/FULL FUNC. NO. has been
restricted, type in the number specified for FULL FUNC. NO. after pressing the Start key.

Sending a Fax at a Specified Time (Timer Transmission)

A document can be scanned and stored in memory to be sent at a specified time. This feature is
convenient for sending faxes at discounted calling times.
Note:
❏ When sending multiple documents together to a single destination at a specified time, batch
transmission is useful since only a single connection is required.
❏ If the machine is not programmed with the current time, the fax cannot be sent at the specified time.
For details on specifying the time, refer to the Printer/Copier/Scanner User's Guide.
❏ Timer transmission can be combined with broadcast transmission.
1. Position the document to be faxed.
2. If desired, select the image quality.
Note:
For details, refer to "Selecting the Image Quality" on page 26.
3. Press the u or d key to select TIMER TX, and then press the Select key.
The TIMER TX SETTING screen appears.
4. Using the keypad, enter the desired transmission time, and then press the Select key.
Note:
❏ The time is set in the 24-hour format.
❏ If you want to correct the time, press the Back key, and then enter the correct time.
Epson AcuLaser CX37DNF Facsimile User's Guide
Sending Faxes 35