Specifying Settings In Utility Menu; General Procedure For Specifying Settings In Utility Menu; Memory Reception - Epson AcuLaser CX37DNF User Manual

Hide thumbs Also See for AcuLaser CX37DNF:

Table of Contents

Specifying Settings in UTILITY Menu

1. Press the u or d key to select UTILITY, and then press the Select key.

2. Press the u or d key to select the desired menu, and then press the Select key to display the

selected menu.

Note:

Refer to the menu configuration on "UTILITY Menu" on page 14 to display the desired menu.

3. To select a setting, press the u , d, lor rkey.

To enter a setting, use the keypad to type in the number.

4. Press the Select key.

The setting is applied.

Note:

To cancel the settings, press the Back key.

Received faxes can be stored in the memory and printed at a specified time. This is convenient, for

example, when confidential documents are received.

Memory reception can be used with the following settings.

❏ Start/end time settings: Not set MEMORY RX MODE function is normally set to ON. To print a fax

saved in memory, set MEMORY RX MODE function to OFF.

❏ Start/end time settings: Set memory reception mode begins and ends at the specified time.

Example 1: When ON TIME setting is set to 18:00 and OFF TIME setting is set to 8:00

The machine is in memory reception mode from 18:00 to 8:00 and in normal reception mode,

where faxes are printed after being received, from 8:00 to 18:00.

Example 2: When ON TIME setting is set to 12:00 and OFF TIME setting is set to 12:00 (the start time

and end time are the same)

Epson AcuLaser CX37DNF

Control Panel and Configuration Menu

Facsimile User's Guide

Table of Contents