Sending A Batch Transmission - Epson AcuLaser CX37DNF User Manual

5. Specify the fax number of the recipient.
Note:
❏ Refer to "Specifying a Recipient" on page 27.
❏ To send a broadcast transmission to multiple destinations, refer to "Sending a Fax to Multiple
Recipients (Broadcast Transmission)" on page 32. After all recipients have been specified, press
the Start key to begin scanning. After scanning is finished, the machine with enter a standby
state.
❏ If the specified speed dial number is registered with batch transmission settings, the fax will be
sent at the time specified for the batch transmission.
6. Press the Start key to begin scanning, and then the machine enters transmission standby mode.
appears in the screen when the machine is in standby mode.
Note:
If you want to cancel a timer transmission, select CANCEL RESERV.. For details, refer to "Canceling
a Queued Transmission" on page 42.

Sending a Batch Transmission

Multiple documents can be scanned and stored in the memory of this machine to be sent together to a
single destination at a specified time.
Note:
From the UTILITY menu, batch transmission settings (transmission time) must have been registered
with a speed dial number in advance. For details, refer to "Using the Speed Dial Function" on
page 29.
1. Position the document to be faxed.
2. If desired, select the image quality.
Note:
For details, refer to "Selecting the Image Quality" on page 26.
3. Select destinations for the batch transmission from the favorite list, or specify their speed dial
number.
Epson AcuLaser CX37DNF Facsimile User's Guide
Sending Faxes 36