Changing the Transmission Method
The transmission method can be temporarily changed from the default setting.
1. Position the document to be faxed.
2. If desired, select the image quality.
Note:
For details, refer to "Selecting the Image Quality" on page 26.
3. Press the u or d key to select the current transmission method, and then press the Select key.
The TX MODE screen appears.
Note:
If memory transmission has been specified as the default, MEMORY TX appears. If direct transmission
has been specified as the default, DIRECT TX appears.
4. Press the u or d key to select the desired transmission method, and then press the Select key.
5. Specify the fax number of the recipient.
Note:
❏ Refer to "Specifying a Recipient" on page 27.
❏ To send a broadcast transmission to multiple destinations, refer to "Sending a Fax to Multiple
Recipients (Broadcast Transmission)" on page 32.
6. Press the Start key to begin scanning and sending the fax.
Note:
❏ To stop the transmission, press the Stop/Reset key. A message appears, requesting confirmation
to cancel the setting. Select YES, and then press the Select key.
❏ If FAX TX in ADMIN. MANAGEMENT/PASSWORD SETTING/FULL FUNC. NO. has been
restricted, type in the number specified for FULL FUNC. NO. after pressing the Start key.
❏ The transmission method returns to the default setting after the document is scanned with a
normal transmission or after transmission with a manual transmission. It is useful if the most
frequently used transmission method is selected as the default. For details, refer to the Printer/
Copier/Scanner User's Guide.
Epson AcuLaser CX37DNF
Facsimile User's Guide
Sending Faxes
38