Table of Contents
Advertisement
2. Press the u or d key to select DIAL REGISTER, and then press the Select key.
3. Press the u or d key to select GROUP DIAL, and then press the Select key.
The GROUP DIAL screen appears.
4. Use the keypad to type in the number of the group dial destination to be edited/deleted, and then
press the Select key.
Note:
For details on entering/editing text and the characters that can be entered, refer to "Entering Text"
on page 78.
5. Press the u or d key to select EDIT or DELETE, and then press the Select key.
❏ If EDIT was selected, the name is displayed. Continue with step 6.
❏ If DELETE was selected, the settings programmed for the group dial number are deleted. This
completes the procedure when it is deleted.
6. If you want to change the name of the group, enter the new name, and then press the Select key.
Note:
For details on editing text, refer to "Entering Text" on page 78.
7. Add/delete destinations.
❏ To add a destination, check that ADD is selected, and then press the Select key. Type in the
speed dial number, press the Select key, and then press the Select key again.
❏ To delete a destination, press the u or d key to select CHECK/EDIT, and then press the Select
key.
Press the u or d key to select the destination to be deleted, and then press the Stop/Reset key.
Check that YES is selected, and then press the Select key.
The destination is deleted from the group dial list.
8. Press the u or d key to select FINISH, and then press the Select key.
The edited information is registered with the group dial number.
Epson AcuLaser CX37DNF
Registering Recipients
Facsimile User's Guide
66
Advertisement
Table of Contents
