Installing Batteries In The Remote Control; Charging The 3D Glasses - Epson PowerLite Home Cinema 3020plus User Manual

Installing Batteries in the Remote Control

The remote control uses two AA batteries.
Warning: Keep batteries away from children. If a battery is swallowed, contact your doctor
immediately.
1. Release the tab and lift open the cover.
2. Insert two new AA batteries as shown.
3. Insert the tab on the cover and press it down until it clicks into
place.
Aim the remote control at the screen, or at the front or back of the
projector. Make sure you are within 32 feet (10 meters) of the projector.
If you suspect the batteries are weak, press the illumination button. If
the buttons do not glow, check the battery orientation or replace the
batteries.

Charging the 3D Glasses

If you are using EPSON RF 3D Active Shutter Glasses, follow these steps to charge the
glasses:
1. Plug a USB cable into the port on the bridge of the glasses.
19
Setting Up the Projector