Table of Contents
Advertisement
Using HDMI Link
When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you
can control them using the HDMI Link control buttons on the projector's remote control.
This lets you use just one remote control to operate many commonly used features on all your
devices.
In a typical configuration, your DVD player may be connected to the projector through an
amplifier or home theater system. Even if the amplifier does not conform to the HDMI CEC
standard, you can still use the projector's HDMI Link control buttons to operate the DVD
player as long as the DVD player conforms to the HDMI CEC standard.
Note: Some HDMI CEC functions may not operate, depending on the connected product's design
and compliance with the HDMI CEC standard.
Setting Up HDMI Link
To prepare your devices to work with the HDMI Link control buttons, follow these steps:
1. Press the
HDMI Link
2. Select
HDMI Link
3. Press the
HDMI Link
HDMI
Amplifier
button on the projector's remote control.
and set it to
.
On
button to exit the menu system.
HDMI
DVD player
Using HDMI Link
55
Advertisement
Table of Contents
