3D Setup - Epson PowerLite Home Cinema 3020plus User Manual

3D Setup

Use this menu to adjust 3D brightness, the 3D display format and other 3D settings.
Note: You should only adjust the 3D Format and Inverse 3D Glasses settings if 3D images aren't
displaying correctly. Changing these settings unnecessarily may cause problems with 3D
projection.
■
3D Display
Signal > 3D Setup > 3D Display
Enables or disables 3D mode. You can also change this setting by pressing the
button on the remote control.
■
2D-to-3D Conversion
Signal > 3D Setup > 2D-to-3D Conversion
Enable this setting to convert 2D images from an HDMI into 3D content.
■
3D Format
Signal > 3D Setup > 3D Format
Use this setting to select the 3D format supported by your video device. In most cases, the
projector will correctly detect the 3D format when this option is set to
only select the
2D
doesn't properly display 3D images. See your video source documentation for
information on which mode to select.
■
3D Depth
Signal > 3D Setup > 3D Depth
Adjusts the depth of the 3D images. Select the
the appearance of the 3D effect.
■
3D Brightness
Signal > 3D Setup > 3D Brightness
Adjusts the brightness of 3D images. Select the
display is too dark.
■
Diagonal Screen Size
Signal > 3D Setup > Diagonal Screen Size
Match this setting to the size of the projected 3D image to maximize the 3D effect and
the quality of the image.
, , or
Side by Side Top and Bottom
formats when your projector
or settings to increase
Medium Strong
or settings if the 3D
Medium High
Making Detailed Adjustments
2D/3D
. You should
Auto
45