Brother DCP-7030 Service Manual page 162

(6) Loosen the tip of the Edge actuator spring from the Actuator holder ASSY.
(7) Release the Hook and Slide the Edge actuator to remove the Edge actuator from the
Actuator holder ASSY.
Edge actuator spring
Actuator holder ASSY
(8) Remove the Taptite bind B M3x10 screw, and then remove the Registration front sensor
PCB ASSY from the Actuator holder ASSY.
Taptite bind B M3x10
Registration front sensor
PCB ASSY
Edge actuator
7c
6
7b
7a
Hook
Fig. 3-86
Fig. 3-87
3-84
Edge actuator
Actuator holder ASSY
Confidential