Brother DCP-7030 Service Manual page 190

■ EEPROM Parameter Initialization of Main PCB (Maintenance Mode: Code 01)
Refer to "1.4.1 EEPROM Parameter Initialization (Function code 01, 91)"
perform the EEPROM parameter Initialization of main PCB.
■ EEPROM Customizing of Main PCB (Maintenance Mode: Code 74)
Refer to "1.4.16 EEPROM Customizing (Function code 74)"
EEPROM Customizing.
For models in France and surrounding countries, Pan-Nordic, Oceania or Iberia, implement
the setting for Code 74 in Maintenance mode first. Then, implement more detailed settings
for Code 52.
■ Operational Check of Control Panel Button (Maintenance Mode: Code 13)
Refer to "1.4.8 Operational Check of Control Panel Button (Function code 13)"
5, and perform the operational check of control panel PCB.
■ Operational Check of Sensors (Maintenance Mode: Code 32)
Refer to "1.4.10 Operational Check of Sensors (Function code 32)"
perform the operational check of sensors.
■ Acquisition of White Level Data and Set the CIS Scanner Area
(Maintenance Mode: Code 55)
Refer to "1.4.14 Acquisition of White Level Data (Function code 55)"
perform the acquisition of white level data and CIS scanner area setting.
■ Setting the serial number
<Procedures>
(1) Connect the PC and machine with the USB cable.
(2) Double-click the brmainte. EXE file (maintenance utility) which has been copied in the
"ALL2" folder to start.
Select Input Information from Menu. Select the applicable model name.
in Chapter 5, and perform the
4-7
in Chapter 5, and
in Chapter
in Chapter 5, and
in Chapter 5, and
Confidential