Brother DCP-7030 Service Manual page 281

<WSW37>
Selector No.
Printout of the stored image
1 data of an unsent document
onto an error report
Erasure of the stored image
data of an unsent document at
2
the time of the subsequent in-
memory message transmission
3
I Not used.
.8
• Selector 1: Printout of the stored image data of an unsent document onto an error report
This selector determines whether or not to print out the 1st-page image data of a document
onto the error report if the document image data stored in the temporary memory cannot
be transmitted normally.
• Selector 2: Erasure of the stored image data of an unsent document at the time of the
subsequent in-memory message transmission
If in-memory message transmission fails repeatedly when selector 1 is set to "1," the
temporary memory will be occupied with image data. Setting selector 2 to "1" will
automatically erase the stored 1st-page image data of an unsent document at the time of
the subsequent in-memory message transmission only when recording paper or toner runs
out.
Function
App. 1-42
Setting and Specifications
0: No 1: Yes
0: No 1: Yes
Confidential