Brother DCP-7030 Service Manual page 70

■ The control panel does not work.
Step Cause
Key sticking
1
Connection
between main
2
PCB and control
panel PCB
Harness
between main
3
PCB and control
panel PCB
Rubber Key
4
Control panel
5 PCB
Main PCB
6
Check
Is a key on the control
panel stuck?
Are the main PCB and
control panel PCB
connected properly?
Is the harness
damaged?
Is the problem solved
after replacing the
rubber key?
Is the problem solved
after replacing the
control panel PCB?
Is the problem solved
after replacing the main
PCB ASSY?
1-52
Result Remedy
Clean the panel cover, or
remove the any burrs from
Yes
the panel cover and panel
keys.
Reconnect the connector
correctly.
No
Replace the harness with
a normal one.
Yes
Replace the rubber Key.
Yes
Replace the control panel
Yes PCB.
Replace the main PCB
Yes ASSY.
Confidential