Brother DCP-7030 Service Manual page 215

Model without PCL/PS
Function
Manual Feed Switching of the Manual Feed
Sleep Time Setting of the time until enter the SleepMode for
the engine
Auto I/F Time Switching of the I/F open time
P-Pos X-Offset Switching of the offset print position of the
landscape orientation
P-Pos Y-Offset Switching of the offset print position of the
portrait orientation
<Operating Procedure>
(1) MFC7840W/7840N/7450/7440N/7340/7320
Press in order the 4 and 3 buttons in the initial stage of the maintenance mode.
DCP7045N/7040/7030
Press the or
OK button. "Manual Feed" appears on the LCD.
(2) Press the or
button.
(3) Press the or
the OK button. parameter value is confirmed.
<Function explanation>
Function
MANUAL FEED
RESOLUTION
TONER SAVE
DENSITY
Description
button. "MAINTENANCE 43" appears on the LCD, and then press the
button. The item to change is displayed on the LCD, and press the OK
button, or charge the parameter using the numeric keys. And press
Set value
ON/OFF Configure the setting for the ON/OFF of the manual
paper feed. Effective for the print from the PC, or for
the print of the NetWorkConfig/TestPrint/Fontlist/
Configuration from the panel. When select the tray
on the PC, the setting becomes effective. And this
setting is ignored.
(Default : OFF)
300/600/1200 Configure the setting for the Resolution. Effective
only for the print from the PC. When set the
Resolution on the PC, the setting becomes effective.
And this setting is ignored.
(Default : 600)
ON/OFF Configure the setting for the Toner Save Mode.
Effective for all print, and change the setting of the
Manu (Function). However, as for the Copy, this
setting becomes invalid. When set the Toner Save or
the PC, the setting becomes effective. And this
setting is ignored.
(Default : OFF)
-6 to 6 Configure the setting for the Density. Effective for the
print from the PC, or for the print of the
NetWorkConfig/TestPrint/FontList/Configuration from
the panel. Link the setting of the Toner Save. Judge
the both setting, and decide the density. When set
the Density or the PC, the setting becomes effective.
And this setting is ignored.
(Default : 0)
5-19
Set value
On/Off
0 to 99 (minutes)
1 to 99 (seconds)
-500 to 500 (1/300dpi)
-500 to 500 (1/300dpi)
Problem
Initial
value
Off
5
5
0
0
Confidential