Accessories - HP 8517B Operating & Service Manual

Accessories Available
Table 1-5
Accessory Type
1
Calibration Kit
1
Verification Kit
Cables
Cables (Continued)
Getting Started

Accessories

Accessories
The accessories supplied with the test set, including part numbers, are listed
in "Accessories Supplied" in this section and in the "Replaceable Parts List"
of this manual.
Table 1-5 describes accessories available for the HP 8517B test set. For
additional HP 8510C system accessories information, refer to the HP 8510C
manual set.
HP 8517B Test Set Accessories Available
Accessory Model Number
HP 85056A 2.4 mm Calibration Kit
HP 85057S 2.4 mm Verification Kit
HP 85133C 2.4 mm Test Port Return
Cable
HP 85133D 2.4 mm Test Port Return
Cable Set
HP 85133E 2.4 mm Flexible Test Port
Return Cable
HP 85133F 2.4 mm Flexible Test Port
Return Cable Set
HP 85134D 3.5 mm Test Port Return
Cable Set
HP 85134E 3.5 mm Flexible Test Port
Return Cable
HP 85134F 3.5 mm Flexible Test Port
Return Cable Set
HP 85135C 7 mm Test Port Return
Cable
HP 85135D 7 mm Test Port Return
Cable Set
1-10 HP 8517B S-Parameter Test Set Manual
Contents or Description
Contains open and short circuits
Fixed and sliding loads (2)
2.4 mm to 2.4 mm adapters
2.4 mm connector tools and gauges
Contains precision airline, mismatched airline,
20 dB and 40 dB attenuators
Used when measuring a 2.4 mm-ported device connected directly to
Port 1 of the test set. The test port return cable is connected
between the device under test and Port 2.
Used when measuring a 2.4 mm-ported device connected between
the cable ends.
Used when measuring a 2.4 mm-ported device connected directly to
Port 1 of the test set. The test port return cable is connected
between the device under test and Port 2.
Used when measuring a 2.4 mm-ported device connected between
the cable ends.
Used when measuring a 3.5 mm device under test connected
between the cable ends.
Used when measuring one end of a 3.5 mm device connected
directly to an HP 85130F adapter at Port 1. The test-port return
cable is connected between the device and Port 2.
Used when measuring a 3.5 mm device connected between the
cable ends.
Used when measuring one end of a 7 mm device connected
directly to an HP 85130E adapter at Port 1. The test port return
cable is connected between the device and Port 2.
Used when measuring a 7 mm device connected between the cable
ends.