Av Input Setup; Av Interface Setup - Kenwood DNX7140 Instruction Manual

Setup Menu
AV Input Setup
You can set AV input parameters.
D
Display the AV-IN Setup screen
Touch
[OJ >
[~]
>
[AV-IN SETUP]. (page
63)
D
Set each item
[AV-IN Interruption] Sets an image display of
the system that is connected via the AV INPUT
port.
(12]
"OFF")
"OFF": When the image source is switched, an
image entered via the AV INPUT port is
displayed.
"ON": When an image signal is entered via the
AV INPUT port, this image is displayed.
[On Screen AV-IN] Sets an on-screen display
of the AV-IN playback screen.
(121
"Auto")
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
[iPod AV Interface Use] Sets the terminal to
which the iPod is connected to.
(121
"iPod")
[] Sets a name to be displayed when you
select a system that is connected via the AV
INPUT port.
(121
"VIDEO")
76 DNX7140/DNX7000EX/DDX714/DDX7034BT
AV Interface Setup
You can set audio and visual (AV) interface
parameters.
D
Display the AV Interface screen
Touch
[Ga]
>
[~]
>
[AV Interface]. (page 63)
D
Set each item
[AV-OUT] Selects an AV source to be output at
the AV OUTPUT port.
(121
"AV-IN")
[R-CAM Interrupt] Sets a method to switch to
the rear view camera video display.
(121
"OFF")
"ON": Switches to the rear camera video
display when "Reverse" gear is engaged.
"OFF": Switches to the rear camera video
display when "Reverse" gear is engaged
and then pressing the [AUDJ button for
more than 1 second.
The function of the [AUD] button needs
to be set to "R-CAM" beforehand. See
<User Interface> (page 66).
[R-CAM Mirror] You can flip the left and right
of the rear view camera video display. Set to
"ON" and the rear view will be displayed left
and right in mirror image on the screen.
(121
"OFF")