Kenwood DNX7140 Instruction Manual page 93

I
D
Turns the power On
I
D
Set each item
I
[Language] Select the language used for the
control screen and setting items. (page 66)
[Angle] You can adjust the position of the
monitor. (page 69)
[iPod AV Interface Use] Sets the terminal to
which the iPod is connected to. (~ "iPod")
[R-CAM Interrupt] Sets a method to switch to
the rear view camera video display.
([2]
"OFF")
"ON": Switches to the rear camera video
display when "Reverse" gear is engaged.
"OFF": Switches to the rear camera video
display when "Reverse" gear is engaged
and then pressing the [AUD] button for
more than 1 second.
The function of the [AUD] button needs
to be set to "R-CAM" beforehand. See
<User Interface> (page 66).
[Color] Sets the screen and button illumination
color. (page 72)
[EXT SW]
Setting up power specification of
the external device for which the power is
controlled from this unit (page 69)
D
End initial setup
Q
~
• The settings above can be changed in <Setup Menu>
(page 63)
English 93