Kenwood DNX7140 Instruction Manual page 99

"Update your USB database" :
The USB device is different from the previous one or
the contained audio files are replaced
- Update your database. Refer to <Source Control
Screen> of USB Device Control (page 22).
"Check SIRIUS" :
The unit cannot recognize the connected SIRIUS Tuner
Box.
- Check the connection of the SIRIUS Tuner Box.
"Antenna Error" :
Something is wrong with the anntena.
- Check the connection of the antenna.
"Acquring Signal" :
The unit cannot receive any signal.
- Move the vehicle to the area where the unit can
receive signal.
"Updating Firmware" :
Updating the firmware of SIRIUS tuner.
- Operation is invalid until the update is
completed.
"Updating Channels **% Completed" :
Updating the SIRIUS Channel Map.
- Operation is invalid until the update is
completed.
"Subscription Updated" :
Updating the suscription information.
- Operation is invalid until the update is
completed.
"Invalid Channel" :
The selected channel is invalid
- Select a different channel.
"Call 888-S39-SIRIUS to Subscribe" :
The selected channel is not subscribed.
- Call the displayed number for subscription.
"CHECK XM TUNER" :
The unit cannot recognize the connected XM Tuner.
- Check the connection of the XM Tuner.
"NO SIGNAL" :
The unit cannot receive any signaL
- Check the connection of the antenna.
"CHECK ANTENNA" :
Something is wrong with the antenna.
- Check the connection of the antenna.
lOCH UNAVAILABLE" :
The selected channel is invalid.
- Select a different channel.
ItCH UNAUTHORIZED" :
The selected channel is not subscribed.
"OFF AIR" :
The broadcast of the selected channel has finished.
English 99