Data Disk Dual Configuration Procedure - NEC N8800-155F User Manual

Data Disk Dual Configuration Procedure

Follow the procedure below to configure dual data disk for the slot 1 to 7.
IMPORTANT:
The following shows how to configure dual disk for the slot 1. If you want to
configure the dual disk for slot 2 to slot 7, read "slot 1" as the slots you want
to make dual configuration and perform the procedure.
Insert a disk for the dual configuration into the slot 1 of PCI Module 10.
1.
If a disk is already mounted, this procedure is not necessary. Go to step 2.
Start [Computer Management] by going
2.
to [Start] − [Control Panel] −
[Administrative Tools], and select [Disk
Management] on the left tree. If the
disk which is to be set as dual
configuration shows as "Not Initilized"
on the right pane, right click on the
relevant disk to initialize.
IMPORTANT:
A popup window prompting to reboot appears when you insert or initialize
the disk; however, you do not need to reboot the system.
Select [Restart Later] to exit the popup window.
Windows Setup 4-55