Step 9: Create Volume - NEC N8800-155F User Manual

4-60 Windows Setup

Step 9: Create Volume

For NEC Express5800/ft series, you need to perform mirroring for each disk by the RDR function.
If you created a new partition or volume on the disk that has been set RDR and dual configuration,
the area is mirrored automatically. You do not need to perform mirroring for each partition or
volume.
IMPORTANT:
Note the following issues when you execute Active Upgrade under the status that the
OS installed disk has partitions other than the system partition.
- All the data upgrade is discarded for the system disk of the Production Side that
runs Active Upgrade.
A mirrored volume (RAID-1) or RAID-5 volume cannot be used on a dynamic disk.
TIPS:
To create a partition or volume, refer to the Windows online help.
You can create a partition or volume even after the operation has been
started.