NEC N8800-155F User Manual page 119

NOTE:
To specify "Complete Memory Dump" to write the debug information is recommended.
If the mounted memory size is larger than 2GB, "Complete Memory Dump" cannot be
specified so that specify "Kernel Memroy Dump" instead.
Specify the drive where there is a free area more than the size of "the memory capacity
mounted on Express server + 300MB".
In case the mounted memory size exceeds 2GB due to the added memory, change the
write debugging information to [Kernel Memory Dump] before adding memory.
The size of debugging information (memory dump) to be taken also changes due to
adding memory. Verify the size of the empty space in the debugging information
(memory dump) write destination drive.
Click [Settings] in the [Performance] group box.
7.
The [Performance Options] window appears.
Click [Advanced] tab on the [Performance Options] window.
8.
Click [Change] on the [Virtual memory] group box.
9.
Uncheck the [Automatically manage paging file size for all drives] box, and check [Custom
10.
size].
On the [Paging file size for each drive] box, specify as follows:
11.
− A value larger than the recommended size shown in [Total paging file size for all drives]
for [Initial size]
− A value larger than the [Initial size] for [Maximum size]
Then click [Set].
IMPORTANT:
The above-mentioned paging file size is recommended for collecting debug information
(memory dump).
The paging file with initial size large enough to store the dump file in the boot drive is
required.
Correct debug information might not be able to be collected due to virtual memory
shortage when the paging file is insufficient, so set an enough size of the paging file
with the entire system.
For more information on "Recommended" value, see "About the System Partition Size"
described earlier.
In case the memory is expanded, re-specify the paging file to suit the new memory size.
Click [OK].
12.
The message to restart the system may appear according to the modified specification.
In such case, follow the message to restart the system.
Windows Setup 4-65